The following steps explain how to add or delete door lock user codes from the keypad.
Weiser Lock
Adding User Codes
- Press the program button.
- Enter a new 4-8 digit user code.
- Press the lock button.
- If successful, the keypad will flash green once and you will hear 1 beep (if switch #3 is on).
- If unsuccessful, user code may already be programmed or maximum of 30 user codes have been programmed.
- Verify new user code can be used to unlock the door lock.
Deleting User Codes
- Press the program button.
- Press the lock button.
- Enter user code to delete.
- Press lock button.
- Re-enter user code to delete.
- Press lock button.
- If successful, the keypad will flash green once and you will hear 1 beep (if switch #3 is on).
- If unsuccessful, complete steps 1-6, ensuring the same code is entered in steps 3 and 5.
- Verify user code can no longer unlock the door lock.
Yale YRD220
Adding User Codes
- Enter the master code then press # to enter the menu.
- Select 2 then press # to register a code.
- Select option 1 to register a user code.
- Select a user slot (from 1-250) to place the code and press # to confirm.
- Enter a 4-8 digit user code and press # to confirm, then press * to complete the process or # to add more user codes.
Deleting User Codes
- Enter the master code then # to enter the menu.
- Select 2 then press # to register a code.
- Select option 3 to delete an existing user code.
- Select a user code slot (from 1-250) to delete the corresponding code and press # to confirm deletion.
- Then press * to complete the process or # to continue to delete user codes.