Use the Large Button Voice Remote

• Voice command: press and release (or press and hold) the Mic button to use voice commands and find the content you want to watch.
• Accessibility: The remote is compatible with most assistive services. It also has vibration feedback, backlit buttons, and a removable wrist strap.
• Shortcut: press the yellow asterisk button at the top left of the remote to quickly access your favourite preset destination: you can preset to the guide, accessibility options or a screensaver.
• Easy battery replacement: push the yellow button on the back of the remote (opposite the wrist strap) to open the compartment. Pull the lift tabs to remove the old batteries and replace them.
  • The compartment does not fully remove from the remote.

1. Press the yellow asterisk (*) button on your remote.
2. Select Yes.
3. Select Accessibility Settings.
4. Select Shortcut Button and assign to your favourite destination. You can choose the guide, accessibility options or a screensaver.
5. You’re all set! Press the asterisk (*) button next time you want to access your Accessibility shortcut.

Unlike The Rogers Xfinity Big Button Remote, The Rogers Xfinity Large Button Remote doesn’t have the A-B-C-D buttons (triangle-square-circle-diamond) or the Record button. 

Instead, you can use the following steps in place of the missing buttons:

• Record button – Record options available via Guide or Info on content
• A – Say “Help” or go to Settings -> Help
• B – Programable yellow asterisk button or go to Settings -> Accessibility
• C – Say “Sports App” or go to Apps -> Sports app 
• D – PVR options

Once paired, you can use your remote to change channels, use voice commands, search for shows and much more… even if you’re in another room!

Smart Pairing

1. Aim the thicker, slanted end of the remote at your Rogers Xfinity Entertainment Box and press the Mic button.
   • To make sure the remote is pointed in the right direction, check if the attached strap is toward your body.
   • The Mic button is a dished, glossy, round button directly below the down arrow of the metal directional pad at the center of the remote.
2. Follow the on-screen instructions to complete pairing.

If Smart Pairing doesn't work, try these steps:

Manually Pairing

1. Hold the Home and Info buttons for five seconds.
   • Info is a round, black button in the middle row, second button down from the top of the remote.
   • Home is a black button on the right side of the remote below the directional pad.
     • It has a white house icon.
2. Wait for the remote light to change from red to green.
   • The remote will buzz gently.
3. Follow the instructions – enter the three-digit, on-screen pairing code.
4. Once your remote is paired, follow the on-screen steps to set up power, volume and input control for your TV.

Control the power, volume and input on your TV with the Rogers Xfinity Large Button Voice Remote.

If you have already paired the remote with your Rogers Xfinity Entertainment box, but skipped TV pairing. A voice command of "remote pairing" can be used to start the on screen pairing steps, or follow the manual process below:

1. While the TV is on, press and hold the Home and Mute buttons on the remote together for five seconds.
   • Home is a black button on the right side of the remote below the directional pad.
     • It has a white house icon.
   • Mute is the first button at the top center of the remote. 
   • Hold for five seconds until the remote light at the top changes from red to green.
     • The remote will buzz gently.
2. Enter the first five-digit code listed for the TV manufacturer.
   • Most likely code: 10810
   • Others to try: 11685, 11791, 11786, 12337, 11712, 11913
   • Valid code: Remote light blinks green twice
   • Invalid code: Remote light blinks red, then green
3. Aim the remote at the TV and press the Power button.
   • The Power button is on the top right hand corner of your remote.
   • If the TV turns off, turn the TV back on and verify that the Volume and Mute buttons work.
   • If the TV doesn't turn off, repeat this process with the next TV manufacturer device code.

Control your Audio/Video Receiver or Soundbar’s volume and power from the Rogers Xfinity Large Button Voice Remote.

1. With the TV and Audio/Video Receiver or Soundbar on, press and hold the Home and Mute buttons on the remote together for five seconds.
   • Home is a black button on the right side of the remote below the directional pad.
     • It has a white house icon.
   • Mute is the first button at the top center of the remote. 
   • Hold until the remote light at the top changes from red to green.
     • The remote will buzz gently.
2. Enter the first five-digit code listed for the Audio/Video Receiver or Soundbar manufacturer.
   • Most likely code: 31495
   • Others to try: 11685, 11791, 11786, 12337, 11712, 11913
   • Valid code: Remote light blinks green twice
   • Invalid code: Remote light blinks red, then green
3. Aim the remote at the Audio/Video Receiver or Soundbar and press the Power button.
   • The Power button is on the top right hand corner of your remote.
   • If the TV turns off, turn the TV back on and verify the Volume and Mute buttons work.
   • If the TV doesn't turn off, repeat this process with the next manufacturer code listed above.

If you're having issues with the remote, you can perform a factory reset using these steps:

1. Press and hold the Home and Page Up buttons at the same time. The status light will change from red to green in about 5 seconds.
2. Press 9-8-1 to complete the factory reset.

For additional help, visit the Rogers Xfinity Voice Remote troubleshooting guide.