Loading...

How to use your Rogers Xfinity Voice Remote: Program & Pair

If you are a Rogers Together with Shaw customer, visit our website for support with our services. 

Follow these simple steps to pair your Rogers Xfinity Voice Remote with your Rogers Xfinity EntertainmentTM Box. You can also program the remote to work with your TV. And if you’d like to control the volume using your remote, you can easily program it to work with AV receivers or sound bars.

BEFORE YOU START:

  • Find out which of these Rogers Xfinity TVTM voice remotes you own:
support-iptv-remote-xr11-rogers support-iptv-remote-xr15-rogers
XR11 Voice Remote  XR15 Voice Remote  
  • Power on. Turn on your TV and/or audio device.
  • Check your batteries. Press any button on the Rogers Xfinity Voice Remote until the LED light turns either red or green. If the LED does not light up, replace your batteries.
support-iptv-remote-xr11-led-rogers support-iptv-remote-xr15-led-rogers
LED on XR11 LED on XR15
  • Check Voice Commands. Press the Mic button on the Rogers Xfinity Voice Remote and say, “Help”.

Did a Troubleshooting Menu appear on your TV?

 

YES NO
Go ahead and program your remote to work with your TV and audio devices. You’ll need to pair your remote with the Rogers Xfinity Entertainment Box.

Pair your Rogers Xfinity Voice Remote with the Rogers Xfinity Entertainment Box

Once paired, you can use your remote to change channels, use voice commands, search for shows and much more… even if you’re in another room!

VOICE REMOTE STEPS
support-iptv-remote-xr11-rogers
  • Press the Setup button on your Rogers Xfinity Voice Remote until the LED at the top changes from red to green.
  • Press the Rogers button. The LED will begin flashing green and the TV screen will prompt you to enter a provided 3-digit code. This may take a few moments to display on your TV.
  • Enter the 3-digit code to finalize the pairing.
  • You will now see the message: “Would you like to control your TV using your remote?” Click “Not now”.
  • You have now paired your XR11 remote to the Rogers Xfinity Entertainment box. Try using voice commands.
VOICE REMOTE STEPS
support-iptv-remote-xr15-rogers
  • Press and hold the Rogers and Info (i) buttons at the same time for 5 seconds. Wait for the remote light to change from red to green.
  • Follow the instructions by entering the 3-digit, on-screen pairing code. This may take a few moments to display on your TV.
  • You will now see the message: “Would you like to control your TV using your remote?” Click “Not now”.
  • You have now paired your XR15 remote to the Rogers Xfinity Entertainment box. Try using voice commands.

Program your Rogers Xfinity Voice Remote to work with your TV

Turn your TV on or off, and control your TV’s volume using the Rogers Xfinity Voice Remote. Here’s how to set it up.

Program or pair your remote with your TV to control the power and volume.

  1. Press the A button on your Rogers Xfinity Voice Remote
  2. Select Remote Setup
  3. Follow the on-screen instructions. 

Still not working? Try these steps for your specific remote type:

* Please make sure TV is powered on.

VOICE REMOTE STEPS
support-iptv-remote-xr11-rogers
  • Hold the Setup button until the LED light changes from solid red to solid green.
  • Enter 9-9-1. The LED will flash green twice.
  • Press the CH+ button slowly multiple times until the TV turns off.
  • Once the TV is turned off, press the Setup button to lock in the code.
VOICE REMOTE STEPS
support-iptv-remote-xr15-rogers
  • Press and hold the Aand D buttons at the same time until the LED at the top changes from red to green.
  • Enter 9-9-1. The LED button will flash green twice.
  • Press the CH+ button slowly multiple times until the TV turns off.
  • Once the TV is turned off, press the Select button located at the centre of the arrow controls to lock in the code.

Program your Rogers Xfinity Voice Remote to work with other devices

Got an AV receiver or sound bar? You can control the volume of these audio devices using the Rogers Xfinity Voice Remote.

To program or pair your Rogers Xfinity Voice Remote to control AV receivers like HDMI compatible sound bars and your home theatre:

  1. Press the A button on your Rogers Xfinity Voice Remote. 
  2. Select Remote Setup
  3. Follow the on-screen instructions.

Keep in mind, not all TV and audio devices can be paired.